Module Add-On Power Optimizers

 

 

Intersolar Award Winner 2012

The SolarEdge module add-on power optimizer is connected by installers to C-Si and thin-film modules. Ease of installation is completed by simply clipping the power optimizer to the module frame or by attaching it to the rail with a single screw.

 

 

 

Module Add-On Power Optimizers

Connected by installers to the PV module and compatible with a wide range of modules

 

Power Optimizer OP Model

Module Power

Module Voc 

OP250-LV

250W

< 55V

OP300-MV

300W

< 75V

OP400-MV

400W

< 75V

OP400-EV 

400W

  < 125V


 

Power Optimizer OPA* Model

Module Power

Module Voc

OPA250-RV

250W

< 47V

OPA300-LV

300W

< 55V

OPA400-MV

400W

< 75V

OPA400-EV 

400W

< 130V

 * Available in volume from 2013



Module Add-On Power Optimizer with IndOP™

Power optimizer with independent optimization technology, can operate directly with any inverter without the need for additional interface hardware


Power Optimizer Model

Module Power

Module Voc

OPI300-LV

≤300W

< 60V / Voc of connected PV module

 


Commercial Power Optimizer

Commercial solution connecting two modules per power optimizer 

 

Power Optimizer Model

Module Power

Module Voc

OP600-96V

≤600W*

< 96V

Rated combined STC power of 2 modules connected in series. Module of up to +5% power tolerance allowed.

Download datasheet

 

  

Feature highlights:

 

  • Per-module Maximum Power Point Tracking (MPPT)
  • Superior efficiency (99.5%) peak performance in both mismatched & unshaded conditions
  • Designed for extreme environmental conditions
  • 25 year reliability and warranty
  • Advanced, real-time performance measurement
  • Automatic module DC voltage shut-down for installer and firefighter safety
  • Independent optimization technology (IndOP™) - allows operation with any inverter and requires no additional interface hardware (OPA models only)