Accessibility Menu
Close AccessibilityChina
China
-
Test Engineer×
Job Description
ATE Global Support Engineer- will work like regular Test engender but also will be responsible to support all other SE CMs like Vietnam/Zala/Sella1/Mexico and HUBs , if needed.
==============================================
Support other SE Production CMs in the other countries
- Quick problem analysis and provide the solution
Production FPY monitoring & improvement:
- Check daily FPY and send daily test report.
- Follow up with yield-hit test issues and push till closed.
- Report yield-hit non-test issues to operation and QnR team to push for improvement.
Tester maintenance:
- Assist to install new stations in the production line
- Check FPY daily and find out maintenance related issues.
- Fix online the tester issues timely.
- Follow maintenance instruction to improve tester maintenance.
- Perform maintenance audit monthly with CM TE team.
Cross sites support:
-Support to approve and send testers to other sites to help with production expansion.
Job description:
- Get and check the NPI plan in advance to verify.
- Collaborate with HQ teams to find and fix problems during the batch.
- After batch, summarize test related issues and follow up with non-fixed issues.
Production FPY monitoring & improvement:
- Check daily FPY and send daily test report.
- Follow up with yield-hit test issues and push till closed.
- Report yield-hit non-test issues to operation and Q&R team to push for improvement.
- Assist to install new stations in the production line
- Check FPY daily and find out maintenance related issues.
- Fix online the tester issues timely.
- Follow maintenance instruction to improve tester maintenance.
- Perform maintenance audit monthly with CM TE team.
Cross sites support: ( such as support VTN project）
-Support to approve and send testers to other sites to help with production expansion.
Job Requirements
Requirements:
-Electronic Technical background – Engineering, Practical Engineering, or related
-Knowledge in electronics, mechanics, and software
-Prior experience as Test Engineer in mass-production
-Hands on attitude
- Good English skill both in written and Vebal.
-
Quality Engineer-Electronic PCB-PCBA (Electronic Process)×
Job Description
To be charge on the following
- Auditing the production line includes: QC references as check list, acceptance criteria, quality inspection and or reliability test procedure;
- Lead failure analysis processes at contract manufacturers (CM) includes, determine the root cause for failures under investigation and implement corrective actions;
- Tightly monitor production quality and yields, analyze the results and lead in cooperation with the CM improvement plans
- Follow up the implementation of the line improvements process regarding the audit’s findings, customer complain etc.
- Support and train technicians QCs regarding the findings and corrective action.
Requirements:
2.1. Education:
2.1.1. BSc Electronic Engineer
2.1.2. Formal Auditor certification
2.2. Experience:
2.2.1. At least Five years relevant experience as process quality engineer in electronic products environmental includes knowledge with process as SMT, Mechanical Process, and Production line Audit etc.
2.2.2. PCB, Electronic parts and assembly: clear with datasheet the requirement, measurements methodologies etc.
2.2.3. Familiar with IPC610, ISO9001, TS16949, quality improvement tools, 8D etc.
2.3. Knowledge:
2.3.1. Bachelor degree with engineering background;
2.4. General characters
2.4.1. Excellent communication, reporting skills
2.5. Language:
2.5.1. English: verbal and writing skills.
2.5.2. Capability for English communications (e mail, data analysis and reporting)
-
QC Operator×
Job Description
岗位职责：
- 依据检查表和作业指导书进行在线稽核。
- 在产线上进行成品检验。
- 记录QC问题点并向QC 领班汇报。
要求：
- 教育：
- 高中（中专）或以上毕业
- 工作经验: 至少3年电子产品生产或相关行业QC工作经验, 熟悉IPC610以及稽核实施。
性格特点： 认真负责。
向QC领班汇报
备注：三班倒，6天8小时。缴纳社保公积金, 外资公司发薪准时，福利好。
早班：7点-15点，中班15点-23点，夜班 23点-7点