Change WiFi Password & Configure Comms

You may need to reconfigure your inverter communication in certain cases, such as when your Wi-Fi network or password has changed. To configure your inverter communication:

1. click "Inverter Communication" in the menu.
2. Refer to the steps above, under "Connect to Your Inverter."
3. The status of your Wi-Fi connection should be ‘disconnected’. To connect to your Wi-Fi network, click “configure.
4. Select your preferred wireless network and insert a password, then click “join.”You will now be connected to your Wi-Fi network. To confirm the connection is successful, click on “inverter communication” in the menu. Connect to the inverter and verify the status as S_OK.